BEC Solution Group
BOMAR
BOMAR Workline 610.450 DGH
BOMAR Workline 610.450 DGH

1 / 6

Workline

Workline 610.450 DGH

Workline DGH is a semi-automatic band saw for two-sided miter cuts. Material clamping and the feed of the saw arm into the cut and back are hydraulic; the full cutting cycle starts at the press of a button, while material feed is manual. The machine can also be switched to manual mode.

Automatic regulation of the band pressure into the cut, depending on the resistance of the material, is part of the standard equipment of the semi-automatic Workline machines.

Key features

  • Semi-automatic, two-sided miter
  • Hydraulic clamping and arm feed
  • Automatic feed-pressure regulation
  • Carbide band guidance
  • Frequency inverter 20 to 120 m/min

Request this machine

At a glance

  • Round Ø, 0°Ø 450 mm
  • Rectangle, 0°610 × 450 mm
  • Miter60° L/R
  • Operating modeSemi-automatic
  • Drive3 kW (BN90LA4), 3 × 400 V / 50 Hz
  • Band speed20 to 120 m/min

Cutting parameters

Miter angleRound Ø (mm)Rectangle (mm)Square (mm)
0°450610 × 450450 × 450
45° right450450 × 400450 × 450
60° right300300 × 290300 × 300
45° left450450 × 250370 × 370
60° left300300 × 290300 × 300

Technical data

Operating modeSemi-automatic
Cutting angle range−60° to +60°
Saw band speed20 to 120 m/min
Saw band dimensions5200 × 34 × 1.1 mm
Drive3 kW (BN90LA4), 3 × 400 V / 50 Hz
Total connected load3.6 kW
Supply voltage3 × 400/230 V, 50/60 Hz, TN-C-S
Max. fuse16 A (3×400 V) / 25 A (3×230 V)
ProtectionIP 54
Coolant capacity40 l
Acoustic pressure (LAeq)76.3 dB

Machine dimensions

Length2770 mm
Width1100 mm
Height1480 mm
Weight800 kg

Matching options

Saw bands

Band size for this machine: 5200 × 34 × 1.1 mm

Bi-metal bands as standard; carbide-tipped bands available for high-performance cutting of solid material.

See all saw bands ›

Material handling recommended

System T · suggested model T640

  • Roller width 640 mm
  • Load capacity up to 600 kg/m
  • Length-stops: TA / TRA / TNCA

Suggested from 610 mm max. material width. Confirm the final configuration with BOMAR.

See all handling ›

Accessories

Micro-spray system
Micro-spray system the MICRONIZER applies lubricant to the tooth tips and band back; ideal for tubes and profiles.
Halogen work light
Halogen work light illuminates the entire working area.
Digital miter display
Digital miter display shows the set angle precisely to 0.1°.
3rd coolant supply
3rd coolant supply an additional coolant feed for particularly wide materials.
Bundle clamping device
Bundle clamping device clamps layers and bundles with an additional vertical clamping unit.