Consumables
Saw Bands
The bite programme offers a broad range of saw bands to solve every sawing task — with the highest possible productivity and service life. From bi-metal universal bands to carbide-tipped high-performance bands, there is a matching band for every material and every BOMAR saw.
The bite programme
Milled combination teeth — duraflex
duraflex M42
Universal band with milled combination teeth and HSS-M42 tooth tips for a wide range of applications.
duraflex M51
Universal band with milled combination teeth and HSS-M51 tooth tips for a wide range of applications.
duraflex probite
Aggressive band with milled combination teeth and HSS-M51 tooth tips for long-chipping material.
duraflex profil
Band for profiles and tubes with milled combination teeth, a dedicated tooth form with reinforced back and HSS-M42 tooth tips.
Ground combination teeth — boraflex
boraflex M42
Universal band with ground combination teeth and HSS-M42 tooth tips for a wide range of applications.
boraflex M51
Universal band with ground combination teeth and HSS-M51 tooth tips for a wide range of applications.
boraflex probite
Aggressive band with ground combination teeth and HSS-M51 tooth tips for long-chipping material.
Carbide tipped — carbide
carbide MUSP
High-performance band with premium carbide tooth tips — developed for high-alloy, long-chipping materials.
carbide MUSM
High-performance band with premium carbide tooth tips — for high-alloy materials above 50 HRC.
carbide ALU
High-performance band with a special backing for high band speeds and premium carbide tips — for non-ferrous metals and aluminium.
Tooth geometry
PDT — positive rake
A 10° positive rake angle, especially suited to cutting solid material, thick-walled tubes and higher-alloy materials.
ZDT — neutral rake
A 0° rake angle for high-carbon materials, small cross-sections and thin-walled tubes and profiles.
Combination tooth pitch (standard): the tooth-tip spacing varies along the band, which widens the application range and noticeably reduces vibration.
Dimensions & tooth pitches
Band cross-sections (width × thickness, mm)
- 13 × 0.65
- 13 × 0.9
- 20 × 0.9
- 27 × 0.9
- 34 × 1.1
- 41 × 1.3
- 54 × 1.3
- 54 × 1.6
- 67 × 1.6
- 80 × 1.6
Tooth pitches (teeth per inch, combination)
- 0.75/1.25
- 1.1/1.6
- 1.5/2
- 2/3
- 3/4
- 4/5
- 4/6
- 5/6
- 5/8
- 6/10
- 8/12
- 10/14
Bands are welded to length to suit every BOMAR saw. Lengths and prices on request.
Need the right band for your material?
Tell us your machine and material — we recommend the optimal band type, pitch and dimension, and prepare a quote.