Workline
Workline 510.350 DG
Workline DG is a gravity band saw for two-sided miter cuts that also cuts round material. Precise carbide band guidance, a band run in plain bearings and a synchronous chip brush ensure excellent cutting performance and long band life.
Band speed is steplessly adjustable from 20 to 120 m/min via a frequency inverter, and the QUICK MOVE vice clamps material quickly and conveniently. Cutting feed is by the saw arm's own weight, regulated by an overflow valve.
Key features
- Two-sided miter cuts
- Carbide band guidance
- QUICK MOVE quick-clamping vice
- Synchronous chip brush
- Frequency inverter 20–120 m/min
At a glance
- Round Ø, 0°Ø 350 mm
- Rectangle, 0°510 × 350 mm
- Miter60° L/R
- Operating modeManual
- Drive3 kW, 3 × 400 V / 50 Hz
- Band speed20–120 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Flat (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 350 | 510 × 350 | 510 × 350 | 350 |
| 45° right | 350 | 400 × 100 | 340 × 350 | 340 |
| 60° right | 250 | 260 × 100 | 220 × 350 | 240 |
| 45° left | 350 | 415 × 100 | 360 × 350 | 350 |
| 60° left | 270 | 280 × 100 | 220 × 350 | 260 |
Technical data
| Operating mode | Manual |
|---|---|
| Material loading height | 761 mm |
| Saw band speed | 20–120 m/min |
| Saw band dimensions | 4780 × 27 × 0.9 mm |
| Drive | 3 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 2500 mm |
|---|---|
| Width | 1070 mm |
| Height | 1450 mm |
| Weight | 685 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for tubes and profiles.
Halogen work light
illuminates the entire working area.
Digital miter display
shows the set angle precisely to 0.1°.
3rd coolant supply
an additional coolant feed for particularly wide materials.
Bundle clamping device
clamps layers and bundles with an additional vertical clamping unit.