Workline
Workline 410.280 RB
Workline 410.280 RB is a band saw for straight 0° parting and cutting of drawn and rolled bars and profiles in steel, stainless steel, non-ferrous metals and plastics.
It runs a 27 mm saw band with a frequency-converted drive (stepless 20–120 m/min), hydraulic operation with a manual clamping vice, and a flood coolant system.
Key features
- Straight 0° cuts
- 27 mm saw band (3800 × 27 × 0.9 mm)
- Frequency inverter 20–120 m/min
- Hydraulic operation, manual clamping vice
- Flood coolant system (40 l)
At a glance
- Round Ø, 0°Ø 280 mm
- CutStraight, 0°
- Operating modeManual / hydraulic operation
- Drive2.2 kW (TM90 4X B14-FT115), 3 × 400 V / 50 Hz
- Band speed20–120 m/min
Cutting parameters
| Cutting angle | Round Ø (mm) |
|---|---|
| 0° | 280 |
Technical data
| Operating mode | Manual / hydraulic operation |
|---|---|
| Cutting angle | 0° (straight cut) |
| Saw band speed | 20–120 m/min |
| Saw band dimensions | 3800 × 27 × 0.9 mm |
| Drive | 2.2 kW (TM90 4X B14-FT115), 3 × 400 V / 50 Hz |
| Total connected load | 2.6 kW |
| Supply voltage | 3 × 400/230 V, 50/60 Hz, TN-S |
| Max. fuse | 16 A (3×400 V) / 25 A (3×230 V) |
| Protection | IP 54 |
| Coolant capacity | 40 l |
| Acoustic pressure (LAeq) | 76.3 dB |
Machine dimensions
| Length | 2224 mm |
|---|---|
| Width | 1215 mm |
| Height | 1425 mm |
| Weight | 570 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for tubes and profiles.
Halogen work light
illuminates the entire working area.
Digital miter display
shows the set angle precisely to 0.1°.
3rd coolant supply
an additional coolant feed for particularly wide materials.
Bundle clamping device
clamps layers and bundles with an additional vertical clamping unit.