Workline
Workline 510.350 GANC
The automatic Workline GANC is a highly flexible machine suited to small-series production. In semi-automatic mode it allows single-side miter cuts up to 60°; in automatic mode it cuts material up to its maximum round diameter at 0°.
Material feed and clamping are hydraulic, the full cycle is controlled via a clear dialog system on the LCD interface, and the band pressure into the cut is regulated automatically according to material resistance.
Key features
- Automatic NC operation
- Single-side miter up to 60° (semi-auto mode)
- Hydraulic feed and clamping
- Automatic feed-pressure regulation
- Stepless band speed 20–120 m/min
At a glance
- Round Ø, 0°Ø 350 mm
- Rectangle, 0°510 × 350 mm
- Miter60° R
- Operating modeAutomatic
- Drive3 kW, 3 × 400 V / 50 Hz
- Band speed20–120 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Flat (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 350 | 510 × 350 | 510 × 350 | 350 |
| 45° right | 350 | 400 × 100 | 340 × 350 | 340 |
| 60° right | 250 | 260 × 100 | 220 × 350 | 240 |
Technical data
| Operating mode | Automatic |
|---|---|
| Material loading height | 761 mm |
| Saw band speed | 20–120 m/min |
| Saw band dimensions | 4780 × 34 × 1.1 mm |
| Drive | 3 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 2460 mm |
|---|---|
| Width | 2430 mm |
| Height | 1540 mm |
| Weight | 950 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for tubes and profiles.
Halogen work light
illuminates the entire working area.
Digital miter display
shows the set angle precisely to 0.1°.
3rd coolant supply
an additional coolant feed for particularly wide materials.
Bundle clamping device
clamps layers and bundles with an additional vertical clamping unit.