Workline
Workline 410.280 DGH
Workline DGH is a semi-automatic band saw for two-sided miter cuts. Material clamping and the feed of the saw arm into the cut and back are hydraulic; the full cutting cycle starts at the press of a button, while material feed is manual. The machine can also be switched to manual mode.
Automatic regulation of the band pressure into the cut, depending on the resistance of the material, is part of the standard equipment of the semi-automatic Workline machines.
Key features
- Semi-automatic, two-sided miter
- Hydraulic clamping and arm feed
- Automatic feed-pressure regulation
- Carbide band guidance
- Frequency inverter 20 to 120 m/min
At a glance
- Round Ø, 0°Ø 280 mm
- Rectangle, 0°410 × 280 mm
- Miter60° L/R
- Operating modeSemi-automatic
- Drive2.2 kW, 3 × 400 V / 50 Hz
- Band speed20 to 120 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Flat (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 280 | 410 × 280 | 410 × 280 | 280 |
| 45° right | 280 | 310 × 150 | 260 × 280 | 270 |
| 60° right | 210 | 205 × 100 | 175 × 280 | 190 |
| 45° left | 280 | 330 × 100 | 290 × 280 | 280 |
| 60° left | 220 | 225 × 100 | 170 × 280 | 210 |
Technical data
| Operating mode | Semi-automatic |
|---|---|
| Material loading height | 756 mm |
| Saw band speed | 20 to 120 m/min |
| Saw band dimensions | 3800 × 27 × 0.9 mm |
| Drive | 2.2 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 2130 mm |
|---|---|
| Width | 1070 mm |
| Height | 1440 mm |
| Weight | 570 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for tubes and profiles.
Halogen work light
illuminates the entire working area.
Digital miter display
shows the set angle precisely to 0.1°.
3rd coolant supply
an additional coolant feed for particularly wide materials.
Bundle clamping device
clamps layers and bundles with an additional vertical clamping unit.