Ergonomic
Ergonomic 290.258 DGANC
The Ergonomic 290.258 DGANC is a fully enclosed, fully automatic miter band saw with hydraulic raise/lower of the saw arm, a hydraulic vice and motorized, linearly guided material feed (max. 1500 mm per stroke). It offers a two-sided miter range from −45° to +60° with automatic swivel positioning of the saw arm.
A frequency-converted, stepless drive is fitted, and material-height detection shortens cycle times via a rapid approach right up to the material.
Key features
- Fully automatic double-miter saw
- Hydraulic arm and vice
- Motorized linear feed (max. 1500 mm/stroke)
- Miter range −45° to +60°, auto positioning
- Material-height detection (rapid approach)
At a glance
- Round Ø, 0°Ø 258 mm
- Rectangle, 0°325 × 180 mm
- Miter60° L/R
- Operating modeAutomatic
- Drive1.5 kW, 3 × 400 V / 50 Hz
- Band speed20–120 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Square (mm) |
|---|---|---|---|
| 0° | 258 | 325 × 180 | 258 |
| 45° right | 210 | 215 × 100 | 195 |
| 45° left | 180 | 235 × 80 | 195 |
| 60° right | 125 | 135 × 100 | 125 |
Technical data
| Operating mode | Automatic |
|---|---|
| Smallest diameter | Ø 5 mm |
| Shortest remnant length | 280 mm (at 0°) |
| Saw band speed | 20–120 m/min |
| Saw band dimensions | 2910 × 27 × 0.9 mm |
| Drive | 1.5 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 2900 mm |
|---|---|
| Width | 1850 mm |
| Height | 1650 mm |
| Weight | 1500 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for cutting tubes and profiles.
Halogen work light
illuminates the entire working area.
3rd coolant supply
an additional coolant feed for particularly wide materials.
LaserLiner
projects the exact cutting line onto the material.