Ergonomic
Ergonomic 340.278 DG
Ergonomic DG is a gravity band saw with a robust cast-iron saw frame and a 27 mm band. A large turntable allows miter cuts on both sides; when the angle is changed the table rotates synchronously with the saw frame. Precise carbide band guidance and a synchronous chip brush ensure excellent cutting performance and long band life.
Cutting feed is by the saw frame's own weight, regulated by a hydraulic cylinder, and a frequency inverter provides stepless band speed from 20 to 120 m/min.
Key features
- Robust cast-iron saw frame
- Carbide band guidance
- Synchronous chip brush
- Frequency inverter 20–120 m/min
- Miter cuts on both sides
At a glance
- Round Ø, 0°Ø 278 mm
- Rectangle, 0°340 × 100 mm
- Miter60° L/R
- Operating modeManual
- Drive1.5 kW, 3 × 400 V / 50 Hz
- Band speed20–120 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Square (mm) |
|---|---|---|---|
| 0° | 278 | 340 × 100 | 275 |
| 45° right | 260 | 230 × 100 | 230 |
| 60° right | 155 | 145 × 100 | 115 |
| 45° left | 205 | 220 × 100 | 180 |
Technical data
| Operating mode | Manual |
|---|---|
| Smallest diameter | Ø 5 mm |
| Shortest remnant length | 20 mm |
| Saw band speed | 20–120 m/min |
| Saw band dimensions | 3125 × 25 (27) × 0.9 mm |
| Drive | 1.5 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 1700 mm |
|---|---|
| Width | 1570 mm |
| Height | 2100 mm |
| Weight | 400 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for cutting tubes and profiles.
Halogen work light
illuminates the entire working area.
3rd coolant supply
an additional coolant feed for particularly wide materials.
LaserLiner
projects the exact cutting line onto the material.