ProfiCut
ProfiCut 275.230 DG
The ProfiCut 275.230 DG is a manual gravity band saw with a built-in coolant system. Miter cuts are possible on both sides — from 45° left to 60° right. The frame is rotated manually, and the angle is set conveniently at the operator's position via a numeric angle scale on the turntable.
The standard saw-band speed is 40/80 m/min, with manual material feed controlled directly from the operating panel.
Key features
- Built-in coolant system
- Carbide saw-band guide
- Two-speed drive with worm gear
- Quick-action vice
- Miter cuts 45° left to 60° right
At a glance
- Round Ø, 0°Ø 230 mm
- Rectangle, 0°275 × 180 mm
- Miter60° L/R
- Operating modeManual
- Drive1.1 kW, 3 × 400 V / 50 Hz
- Band speed40–80 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Flat (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 230 | 275 × 180 | 250 × 230 | 230 |
| 45° right | 190 | 190 × 150 | 170 × 230 | 180 |
| 60° right | 120 | 120 × 100 | 120 × 100 | 100 |
| 45° left | 170 | 185 × 100 | 90 × 230 | 150 |
Technical data
| Operating mode | Manual |
|---|---|
| Material loading height | 760 mm |
| Shortest remnant length | 40 mm |
| Saw band dimensions | 2720 × 27 × 0.9 mm |
| Smallest diameter | Ø 5 mm |
| Saw band speed | 40–80 m/min |
| Drive | 1.1 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 1520 mm |
|---|---|
| Width | 1150 mm |
| Height | 1670 mm |
| Weight | 330 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for cutting tubes and profiles.
Halogen work light
illuminates the entire working area.
3rd coolant supply
an additional coolant feed for particularly wide materials.
LaserLiner
projects the exact cutting line onto the material.