Ergoline
Ergoline 275.230 DG
Ergoline is a medium-size gravity (pull-down) band saw that offers a high-quality concept in an attractive price range. A welded saw arm with a 27 mm band, driven by a 1.1 kW two-speed motor (35 / 70 m/min) and a well-dimensioned worm gearbox, delivers clean cuts in steel. The arm swivels steplessly from −45° to +60° for miter cutting, and a turntable with a pre-defined cutting channel keeps the band aligned during angle cuts.
Material is held by a fast-clamping vice that can be moved from the left to the right side for angle cuts. Manual band tensioning with electronic monitoring stops the machine on incorrect tension or band breakage, and a constantly rotating steel brush keeps the band clean throughout the cut. All controls sit on a panel mounted directly on the machine pedestal.
Key features
- Welded saw arm, 27 mm band
- Two-speed drive 35 / 70 m/min
- Miter range −45° to +60°
- Turntable with cutting channel
- Three-sided carbide guidance, one adjustable cube
- Electronic band-tension monitoring
- Movable fast-clamping vice
At a glance
- Round Ø, 0°Ø 230 mm
- Rectangle, 0°275 × 155 mm
- Miter60° L/R
- Operating modeManual (gravity)
- Drive1.1 kW, 3 × 400 V / 50 Hz
- Band speed35 / 70 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Flat (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 230 | 275 × 155 | 250 × 200 | 200 × 200 |
| 45° right | 185 | 190 × 100 | 170 × 175 | 170 × 170 |
| 60° right | 115 | 115 × 95 | 115 × 95 | 95 × 95 |
| 45° left | 170 | 190 × 90 | 100 × 200 | 145 × 145 |
Technical data
| Operating mode | Manual (gravity) |
|---|---|
| Smallest diameter | Ø 10 mm |
| Cutting accuracy | ± 0.1 mm / 120 mm |
| Shortest cutting piece | 20 mm |
| Saw band speed | 35 / 70 m/min |
| Saw band dimensions | 2720 × 27 × 0.9 mm |
| Drive | 1.1 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 1775 mm |
|---|---|
| Width | 1190 mm |
| Height | 1610 mm |
| Working height | 740 mm |
| Weight | 310 kg |
Matching options
Accessories
