Aluminium
AL 500 DGANC
The AL 500 ANC is an automatic miter circular saw whose saw frame swivels up to 60° to both left and right. The frame runs on two linear guides mounted on robust columns for square cuts and smooth, trouble-free operation; feed into the cut is hydraulic.
With simple yet comfortable operation it is an economical solution for material cutting and, thanks to a wide range of easily connected accessories, can be fully adapted to customer requirements.
Key features
- Automatic NC operation
- Miter range 60° left to 60° right
- Twin linear-guide saw frame
- Hydraulic full-stroke vice
- Freely positionable control panel
At a glance
- Round Ø, 0°Ø 170 mm
- Rectangle, 0°200 × 115 mm
- Miter60° L/R
- Operating modeAutomatic NC, double miter
- Drive4.0 kW (MDERAXX112-21J), 3 × 400 V / 50 Hz
Cutting capacity
| Miter angle | Round Ø (mm) | Rectangle (mm) | Upright (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 170 | 200 × 115 | 90 × 170 | 150 × 150 |
| 45° right | 150 | 180 × 45 | 60 × 170 | 125 × 125 |
| 60° right | 115 | 125 × 45 | 170 × 40 | 105 × 105 |
| 45° left | 150 | 180 × 45 | 60 × 170 | 125 × 125 |
| 60° left | 115 | 125 × 45 | 170 × 40 | 105 × 105 |
Technical data
| Operating mode | Automatic NC, double miter |
|---|---|
| Cutting angle range | −60° to +60° |
| Blade speed | 50 m/s (blade Ø500) |
| Saw blade size | Ø500 × Ø32 × 4.1 mm |
| Drive | 4.0 kW (MDERAXX112-21J), 3 × 400 V / 50 Hz |
| Total connected load | 5 kW |
| Supply voltage | 3 × 400 V, 50 Hz, TN-C-S |
| Max. fuse | 16 A |
| Protection | IP 54 |
| Feed length (one stroke) | 1500 mm |
| Min. material length | 10 mm |
| Acoustic pressure (LAeq) | 76.3 dB |
Machine dimensions
| Length | 2878 mm |
|---|---|
| Width | 1340 mm |
| Height | 1910 mm |
| Weight | 1000 kg |
Matching options
Accessories
Extraction unit
a mobile, flexibly connectable extraction system with filtration cylinders and a collection area for waste material.
Horizontal clamping device
for stable, variable material support the clamping units can be fitted with a horizontal pickup system.
Extraction fitting
connected directly to the saw blade so chips are removed efficiently into the collection container.
Side cladding
provides reliable protection against dust and offcuts; simple installation and immediate protective effect.
MNCA length stop
easy operation with high positioning speed and accuracy for maximum time and cost savings in material preparation.