Aluminium
AL 500 ANC
The AL 500 ANC is an automatic miter circular saw whose saw frame swivels up to 60° to both left and right. The frame runs on two linear guides mounted on robust columns for square cuts and smooth, trouble-free operation; feed into the cut is hydraulic.
With simple yet comfortable operation it is an economical solution for material cutting and, thanks to a wide range of easily connected accessories, can be fully adapted to customer requirements.
Key features
- Automatic NC operation
- Miter range 60° left to 60° right
- Twin linear-guide saw frame
- Hydraulic full-stroke vice
- Freely positionable control panel
At a glance
- Round Ø, 0°Ø 170 mm
- Rectangle, 0°325 × 110 mm
- CutStraight, 0°
- Operating modeAutomatic
- Drive4 kW, 3 × 400 V / 50 Hz
Cutting parameters
| Cut | Round Ø (mm) | Rectangle (mm) | Upright rect. (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 170 | 325 × 110 | 130 × 305 | 130 |
Technical data
| Operating mode | Automatic |
|---|---|
| Cutting speed | 50 m/s |
| Air pressure | 0.4–0.6 bar |
| Saw blade diameter | 500 mm |
| Bundle cutting | 300 × 120 mm |
| Max. weight of fed material | 150 kg |
| Single feed length | 550 mm |
| Drive | 4 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 960 mm |
|---|---|
| Width | 1794 mm |
| Height | 1571 mm |
| Weight | 550 kg |
Matching options
Accessories
Extraction unit
a mobile, flexibly connectable extraction system with filtration cylinders and a collection area for waste material.
Horizontal clamping device
for stable, variable material support the clamping units can be fitted with a horizontal pickup system.
Extraction fitting
connected directly to the saw blade so chips are removed efficiently into the collection container.
Side cladding
provides reliable protection against dust and offcuts; simple installation and immediate protective effect.
MNCA length stop
easy operation with high positioning speed and accuracy for maximum time and cost savings in material preparation.