Topline
Topline 510.350 DGH
Topline is a semi-automatic band saw with a saw frame that swivels up to 60° to both left and right. The frame runs on two linear guides mounted on robust columns for square cuts and smooth, trouble-free operation; feed into the cut is hydraulic. The hydraulic full-stroke vice with a large contact surface is mounted on the linear guide, and all lines run inside the console and centre column to keep the work area free and safe. The machine is operated from a freely positionable control panel.
With simple yet comfortable operation Topline saws are an economical solution for material cutting and, thanks to a range of easily connected accessories, adapt fully to customer requirements.
Key features
- Semi-automatic double-miter (60° L – 60° R)
- Twin-column construction
- Twin linear-guide saw frame
- Hydraulic full-stroke vice
- Carbide band guidance
At a glance
- Round Ø, 0°Ø 350 mm
- Rectangle, 0°510 × 350 mm
- Miter60° L/R
- Operating modeSemi-automatic
- Drive3 kW, 3 × 400 V / 50 Hz
- Band speed20–120 m/min
Cutting parameters
| Miter angle | Round Ø (mm) | Rectangle (mm) | Upright rect. (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 350 | 510 × 350 | 510 × 350 | 350 |
| 45° right | 360 | 350 × 325 | 315 × 350 | 350 |
| 60° right | 225 | 225 × 325 | 215 × 350 | 225 |
| 45° left | 350 | 355 × 350 | 355 × 350 | 350 |
| 60° left | 235 | 245 × 340 | 230 × 350 | 235 |
Technical data
| Operating mode | Semi-automatic |
|---|---|
| Saw band speed | 20–120 m/min |
| Material loading height | 780 mm |
| Smallest diameter | Ø 5 mm |
| Shortest remnant length | 60 mm |
| Saw band dimensions | 4780 × 34 × 1.1 mm |
| Drive | 3 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 1435 mm |
|---|---|
| Width | 2358 mm |
| Height | 2002 mm |
| Weight | 1050 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies a lubricating film to the tooth tips and band back; ideal for tubes and profiles.
Halogen work light
a powerful halogen light pleasantly illuminates the entire working area.
Digital miter display
shows the set miter angle to 0.1° precision.
3rd coolant supply
an additional coolant feed used for particularly wide materials.
LaserLiner
projects the exact cutting line in the saw-band axis onto the material.