Proline
Proline 520.450 ANC
Proline ANC is an automatic twin-column band saw for straight cuts. Material feed under the band, clamping and the feed of the saw arm into the cut and back are hydraulic; programming is done step by step on a clear film keypad with a graphic display (single feed up to 600 mm).
The machine can be switched to manual mode, features automatic regulation of the band pressure into the cut and a stepless band speed of 20–120 m/min.
Key features
- Automatic NC control
- Hydraulic feed and clamping
- Single feed up to 600 mm
- Automatic feed-pressure regulation
- Stepless band speed 20–120 m/min
At a glance
- Round Ø, 0°Ø 450 mm
- Rectangle, 0°520 × 450 mm
- CutStraight, 0°
- Operating modeAutomatic
- Drive4 kW, 3 × 400 V / 50 Hz
- Band speed20–120 m/min
Cutting parameters
| Cutting angle | Round Ø (mm) | Rectangle (mm) | Flat (mm) | Square (mm) |
|---|---|---|---|---|
| 0° | 450 | 520 × 450 | 520 × 450 | 450 |
Technical data
| Operating mode | Automatic |
|---|---|
| Material loading height | 780 mm |
| Single feed length | 600 mm |
| Saw band speed | 20–120 m/min |
| Saw band dimensions | 6020 × 41 × 1.3 mm |
| Drive | 4 kW, 3 × 400 V / 50 Hz |
Machine dimensions
| Length | 2900 mm |
|---|---|
| Width | 2050 mm |
| Height | 2400 mm |
| Weight | 1600 kg |
Matching options
Accessories
Micro-spray system
the MICRONIZER applies lubricant to the tooth tips and band back; ideal for tubes and profiles.
Halogen work light
illuminates the entire working area.
Clamping-pressure regulation
the clamping pressure of the main and feed vice can be regulated for thin-walled material.
3rd coolant supply
an additional coolant feed for particularly wide materials.
Bundle clamping device
clamps layers and bundles with an additional vertical clamping unit.