Ergonomic 340.278 GANC
Fully hydraulic high-performance automatic band saw with solid construction designed for use in workshops and serial productions. The band saw is capable to perform any cutting-to-length or miter cutting tasks in the case of tubes, sections and solid material. The machine allows to be use for straight cuts and also for miter cuts in a range from 0 ° to + 60 °. The miter angle is adjusted via an easy to control panel. The panel is moveable and allows you an unobstructed view to the machine. The infinitely adjustable cutting speed (from 20 m/min. to 120 m/min.) and simple adjustable cutting feed allow a sensitive and blade-saving cutting. Entire material feeding area is designed as a transit roll-way with embedded rollers. Simple processes, quick sawing cycle times and short residual pieces make this machine an ideal partner for series production.
The VisualDialog control system allows to see the operation parts in short steps on the individual screens, and it is also possible to cut small series economically. The machine can be extend with a wide range of various acessories.
- Two hydraulic horizontal clamping vices
- Robust feeding vice
- Hardmetal band precision guide
- Material roll-way with embedded rollers
|Machine type||horizontal bandsaw|
|Mitre cuts range||0° to +60°|
|Drive||1,5 kW, 3x400 V/50 Hz|
|Saw band speed||20 - 120 m/min.|
|Saw band dimensions||3 125 x 25(27) x 0,9 mm|
|Material loading height||765 mm|
|Shortest remainder length||150 mm|
|Smallest sawing diameter||Ø 5 mm|
|Length||2 050 mm|
|Width||2 650 mm|
|Height||1 800 mm|
Suitable handling systems
Micro-spray-systemFor ideal cutting of pipes and profiles, the micro-spray unit applies a grease film on the teeth points and lateral sides of the saw band.
Laser linerThe laser unit copies the exact line in the saw band axis to the material. Laser liner allows precise adjustment of the marked material.
Additional cooling supplyAdditional coolant supply is used for extra wide materials and wherever normal cooling would not be enough.
Hydraulic bundle clamping device Device for clamping materials in layers and bundles with the use of an additional vertical clamping unit.
Vice pressure regulationThe pressure regulation of both cylinders is centrally preset, firstly to be avoided of the deformations by thin-walled pipes and profiles.
Workspace lightingA LED lamp for lighting the workspace, adjustable and mounted on the flexible arm.
Tenzomat A precise measuring tool for the control of the saw band tension when a new band is installed.
Pistol for machine cleaningTool for fast and easy cleaning of the machine from chips and burrs.