BEC Group Logo
  • +420 533 426 100

Band Saws

Ergonomic 290.258 DGANC

Ergonomic 290.258 DGANC

Universal automatic bandsaw with a robust cast-iron arm and 27 mm high saw band. Material clamping and arm downfeed are controlled hydraulically. The material feeding is manual. The complete cutting cycle is started by pressing the Start button. A fully automatic band saw for double-sided mitre cuts with automatic arm positioning. Material downfeed and clamping and arm downfeed are controlled hydraulically. The maximum length of an individual feed is 1,500 mm. The whole work cycle is completed after the length and number of pieces and angles on each side of a piece have been programmed. The control unit is equipped with a large display. The programming is performed in simple steps, and thanks to a large graphic display of individual sections it is easy to control for the user. Up to 60 programs may be saved in the unit. After switching the machine to the manual mode, all functions of the machine may be controlled separately.
The robust arm is made from grey cast-iron, which means better vibration absorption during cutting than with a welded arm. The outstanding cutting power of the machine results from the following features: a hardmetal band precision guide, an arm joint laid in preloaded conical bearings, a 27 mm high saw band and lastly, a synchronous running brush for chips disposal. The vices are laid solid on preloaded linear guiding. The movable vice opens to both sides, which eliminates collisions with uneven materials. A continuous roller track ensures simple and safe feeding of short materials. The angles are set electromechanically from -45° to +60° within approx. 3 sec.

Key features

  • Automatic downfeed pressure regulation
  • Continuous roller track up to the main vice
  • Hardmetal band precision guide
  • Material slide

Cutting parameters

... ... ...
258 325x180 250x258 258
45°R 210 215x100 180x250 195    
45°L 180 235x80 145x245 165    
60°R 125 135x100 115x125 125    

Technical specification

Working mode automatic
Machine type horizontal bandsaw
Cut mitre cut
Mitre cuts range -45° to +60°
Drive 1,5 kW, 3 x 400 V/50 Hz
Saw band speed 20 - 120 m/min.
Saw band dimensions 2 910 x 27 x 0,9 mm
Material loading height 755 mm
Shortest remainder length 280 mm (0°cutting angle)

Machine dimensions

Length 2900 mm
Width 1850 mm
Height 1650 mm
Weight 1500 kg

Suitable handling systems

Handling System M

Highly flexible handling solution for feeding medium weight materials. Thanks to a unique profile system, “M” System roller tracks may be easily adjusted to customer’s requirements. With the bearing capacity up to 150 kg and a wide range of accessories and connection pieces of BOMAR bandsaws, the “M” System is an ideal partner for handling material in your workshop.

Get more information >

Handling System M

Innovative accessories


Tenzomat A precise measuring tool for the control of the saw band tension when a new band is installed.

Workspace lighting

Workspace lighting A LED lamp for lighting the Workspace, adjustable and mounted on the flexible arm.

Saw band tension indicator

Micro-spray systemFor ideal cutting of pipes and profiles, the micro-spray unit applies a grease film on the teeth points and lateral sides of the saw band.

Third coolant supply

Third coolant supply The third coolant supply is used for extra-wide materials. The coolant supply is flexible and may be individually adjusted to the material shape.

Material stop

Remote diagnostic and maintenanceMaintenance status and error reports are sent through an internet connection, reducing operational downtimes.

Chip removing gun

Chip removing gun Tool for fast and easy cleaning of the machine from chips and burrs.

More in this category: « Ergonomic 375.308 GANC