Ergonomic 320.258 DGH
Universal semi-automatic band saw with a sturdy construction, robust cast iron arm and a 27 mm high saw band. Material clamping and arm displacement are hydraulically controlled. The material feeding is manually. Angle cuts of this type provides a range from -45 ° to +60 °. The arm is rotated manually. Angle cuts can be set directly from the cutting point. After the cut, the machine arm automatically stops in the upper adjustable position. The cast iron arm provides better vibration damping during cutting than the welded arm.
The saw can be easily operated using the control buttons on the front moveable control panel. Cooling unit is built into the machine base. The machine can be extended with a wide range of accessories.
Key features
- Semi-automatic band saw with hydraulic clamping vice
- Hardmetal band precision guide
- Saw band cleaning brush
Cutting parameters
 |
 |
 |
 |
| 0° | 258 | 320x100 | 250 |
| 45°R | 210 | 210x100 | 195 |
| 60°R | 135 | 135x100 | 170 |
| 45°L | 185 | 195x100 | 150 |
Technical specification
| Working mode | semiautomatic |
| Machine type | horizontal bandsaw |
| Cut | mitre cut |
| Mitre cuts range | -45° to +60° |
| Drive | 1,5 kW, 3x400 V/ 50 Hz |
| Saw band speed | 20 - 120 m/min. |
| Saw band dimensions | 2 910x25(27)x0,9 mm |
| Material loading height | 760 mm |
| Shortest remainder length | 20 mm |
| Smallest sawing diameter | Ø 5 mm |
Machine dimensions
| Length | 1 700 mm |
| Width | 1 480 mm |
| Height | 2 000 mm |
| Weight | 390 kg |
Suitable handling systems
Handling System M
Highly flexible handling solution for feeding medium weight materials. Thanks to a unique profile system, “M” System roller tracks may be easily adjusted to customer’s requirements. With the bearing capacity up to 150 kg and a wide range of accessories and connection pieces of BOMAR bandsaws, the “M” System is an ideal partner for handling material in your workshop.
Accessories
Micro-spray-systemFor ideal cutting of pipes and profiles, the micro-spray unit applies a grease film on the teeth points and lateral sides of the saw band.
Laser linerThe laser unit copies the exact line in the saw band axis to the material. Laser liner allows precise adjustment of the marked material.
Additional cooling supplyAdditional coolant supply is used for extra wide materials and wherever normal cooling would not be enough.
Digital arm angle indicatorFor an accurate reading angles of the arm position. Reading variables show digital display.
Workspace lightingA LED lamp for lighting the workspace, adjustable and mounted on the flexible arm.
Tenzomat A precise measuring tool for the control of the saw band tension when a new band is installed.
Pistol for machine cleaningTool for fast and easy cleaning of the machine from chips and burrs.