Orbital 250 NII
Deburring and edge rounding machine for profiles and full materials up to 120 mm in diameter. At the time of deburring, the wire brushes perform a double rotary movement and remove burrs from both (the outer and inner) edges of the processed material. The Orbital 250 NII is equipped with a two-speed industrial motor.
The material insertion hole is located on the front panel of the machine. Material is fed to the brushes manually and thanks to the lower prism, it can be comfortably supported. The brushes have the option of moving in or out to the inlet opening (it allows the brush to be used to the maximum of its deburring abilities). The machine is equipped with three brushes.
Key features
- Completely covering of machine
- Service access to the deburring brush
- Adjustable edges of the inlet opening may be simply adjusted to the size of the material
- Simple anchoring of the machine
*Brushes are not part of the machine. The machine needs a total of 3 identical brushes.
Technical specification
| Maximum material diameter: | 120 x 120 mm |
| Brush size: | 250 x 60 mm / 1 pc |
| Drive: | 2,2 kW, 3 x 400 V/50 Hz |
| Number of revolutions: | 2800 / 1 400 min-1 |
| Machine type: | Deburing unit |
Machine dimensions
| Length: | 1 100 mm |
| Width: | 670 mm |
| Height: | 1 440 mm |
| Weight: | 410 kg |
Accessories
Deburring brush – stainless steelStainless steel brushes in the following sizes: 250/60/0,35 ; 250/60/0,5
Steel brushSteel brushes in the following sizes: 250/60/0,2 ; 250/60/0,35 ; 250/60/0,5
Exhausting device AL-KOMobile, flexible exhausting system with filter cylinders and a section for waste material collection.