Topline 510.350 DGH
The Topline is semiautomatic horizontal band saw with both sided 60° left and right rotating arm. The saw arm is guided by two sturdy columns and mounted on pre-stressed linear guides with zero backlash in both columns. The three-sided precision carbide guide of the saw band, 34mm high saw band and synchronously running swarf-removing brush are the best prerequisites for excellent cutting output of this machine.
Optimum clamping of the workpiece when cutting is facilitated by full-stroke jaw vice, which clamps the material both before and behind the cut.
The machine is equipped with a frequency converter enabling setting of the optimum saw band speed according to the material cut within the range of 20–120 m/min., which signi cantly increases both the service life of the saw bands and the machine productivity.
All of the control elements are located on a freely adjustable control panel. A large variety of optional accessories are available to customize the machine for speci c sawing requirements.
Cutting parameters
0° | 350 | 510x350 | - | 350x350 |
45°R | 360 | 370x350 | - | 350x350 |
60°R | 250 | 350x250 | - | 250x250 |
45°L | 350 | 370x350 | - | 350x350 |
60°L | 250 | 350x250 | - | 250x250 |
Technical specification
Working mode: | semiautomatic |
Machine type: | Horizontal bandsaw |
Cut: | Mitre cut |
Mitre cuts range: | -60° - 60° |
Drive: | 5,2 kW, 3x400 V/50 Hz |
Saw band speed: | 20 - 120 m/min. |
Saw band dimensions: | 4 915x34x1,1 mm |
Material loading height: | 778 mm |
Shortest remainder length: | 60 mm |
Machine dimensions
Length: | 1 435 mm |
Width: | 2 358 mm |
Height: | 2 002 mm |
Weight: | 1 050 kg |
Innovative accessories
Micro-spray system For ideal cutting of pipes and profiles, the micro-spray unit applies a grease film on the teeth points and lateral sides of the saw band.
Saw band tension indicator The saw band tension indicator provides permanent control of the band tension, even during the machine operation.
Chip removing gun Tool for fast and easy cleaning of the machine from chips and burrs.
Laser Liner The laser unit copies the exact line in the saw band axis to the material. Laser Liner allows precise adjustment of the marked material.
Digital angle indicator For an accurate reading angles of the arm position. Reading variables show digital display.
Workspace lighting A halogen lamp for lighting the Workspace, adjustable and mounted on the flexible arm.