ProfiCut 275.230 GANC
Automatic bandsaw with NC control. The start of the whole work cycle is completed after the length and number of pieces have been programmed. The required material length is set very easily on the moveable control panel. The biggest advantage of this machine is the possibility to program a various number of pieces of the processed material, with various lengths, without further control of the machine. The maximum length of an individual feed is 500 mm. A simple dialogue control with text messages is shown on the lighted four-line display.
After switching the machine to the manual mode, all functions may be controlled separately. Material downfeed, material clamping, and arm downfeed are controlled hydraulically. Cast iron arm provide a better absorption of vibrations during cutting than the arm from a welded construction.
This machine is especially suitable for cutting pro les and solid materials of smaller sections with an accuracy of one feed of 0,2 mm.
- efficient automatic mode
- excellent cutting precision on both sides
- double-speed industrial motor
- simple operation and maintenance
|0 °||230||270 x 190||210 x 230||230|
|45 ° R||190||190 x 150||170 x 220||180|
|60 ° R||120||120 x 110||100 x 110||100|
|Machine type:||Horizontal bandsaw|
|Mitre cuts range:||- 45 ° - 60 °|
|Drive:||0,7 / 1,1 kW, 3 x 400 V/ 50 Hz|
|Saw band speed:||35 - 70 m/min.|
|Saw band dimensions:||2 720 x 27 x 0,9 mm|
|Material loading height||768 mm|
|Shortest remainder length:||180 mm|
|Smallest sawing diameter:||ø 5 mm|
|Length:||1 970 mm|
|Width:||2 440 mm|
|Height:||1 650 mm|
Suitable handling systems
Handling System M
Highly flexible handling solution for feeding medium weight materials. Thanks to a unique profile system, “M” System roller tracks may be easily adjusted to customer’s requirements. With the bearing capacity up to 150 kg and a wide range of accessories and connection pieces of BOMAR bandsaws, the “M” System is an ideal partner for handling material in your workshop.
Micro-spray-systemFor ideal cutting of pipes and profiles, the micro-spray unit applies a grease film on the teeth points and lateral sides of the saw band.
Laser linerThe laser unit copies the exact line in the saw band axis to the material. Laser liner allows precise adjustment of the marked material.
Additional cooling supplyAdditional coolant supply is used for extra wide materials and wherever normal cooling would not be enough.
Hydraulic bundle clamping device Device for clamping materials in layers and bundles with the use of an additional vertical clamping unit.
Workspace lightingA LED lamp for lighting the workspace, adjustable and mounted on the flexible arm.
Tenzomat A precise measuring tool for the control of the saw band tension when a new band is installed.