BEC Group Logo
  • +420 533 426 100

Band Saws

ProCarbide 450.450 ASNC

ProCarbide 450.450 ASNC

ProCarbide is powerfull and automatic CNC bandsaw prepared for the heaviest productions. Thanks to the special construction of the machine, there is a posibility to keep the highest sawing standards in hardmetal saw-blades usage, what creates very reasonable ratio between speed and quality of cut.

Machine is supposed to be a part of bigger lines and cutting centers with a combination of conveyors and cross feeding units. New and more intuitive system provides easy adjustment of the machine through dialog communication.

Key features

  • feeding controlled by a servomotor and a ball-type screw
  • saw frame supported on a precise guide, pre-loaded without clearance
  • Higher cutting speed thanks to the use of a hard metal saw band
  • continuous roller track up to the main vice

Cutting parameters

450 450x450 450x350 450

Technical specification

Working mode: automatic
Machine type: Horizontal bandsaw
Cut: Straight cut
Mitre cuts range:
Drive: 11 kW, 3×400 V/50 Hz
Saw band speed: 30 - 230 m/min.
Saw band dimensions: 5 990 x 54 x 1,3 mm
Smallest sawing diameter: Ø 10mm
Shortest remainder length: 80 mm - without bundle device / 140 mm - with bundle device

Machine dimensions

Length: 2 020 mm
Width: 2 800 mm
Height: 2 490 mm
Weight: 3 900 kg

Suitable handling systems


Device for clamping materials in layers and bundles with the use of an additional vertical clamping unit. Hydraulics preheatingFor low temperatures, the hydraulic oil is heated before the saw is started, which reduces the idle time for necessary viscosity to be achieved.

Third coolant supply Third coolant supply The third coolant supply is used for extra wide materials. The coolant supply is flexible and may be individually adjusted to the material shape.

Tenzomat - A precise measuring tool for the control of the saw band tension when a new band is installed. Tenzomat A precise measuring tool for the control of the saw band tension when a new band is installed.

Remote diagnostics and maintenance Remote diagnostics and maintenanceOver an Internet connection, status and error messages are transmitted to the factory and decrease downtime.

Pistol for machine cleaning Pistol for machine cleaningTool for fast and easy cleaning of the machine from chips and burrs.

Swarf removal system Swarf removal systemSwarf extractor with grabs for an integrated system of collection in Proline machines. The saw is prepared for the chip remover installation, which may be Plug-and-Play connected.

More in this category: « ProCarbide 350.350 ASNC