BEC Group Logo
  • info@bomar.cz
  • +420 533 426 100

Band Saws

Individual 720.540 GANC

Individual 720.540 GANC

Universal automatic band saw of a double-column construction, designed also for single-sided mitre cuts. Thanks to their arms rigidity, double-column band saws with both-sided linear guiding achieve much shorter cutting times, especially in cutting full materials, than machines with articulated saw arms. The outstanding cutting power of the machine results from the following features: a three-sided hardmetal band precision guide, a saw arm laid both-sided on preloaded linear guides, a 54 mm high saw band and lastly, a synchronous running brush for chips disposal.

Material downfeed, material clamping and arm downfeed are controlled hydraulically. The maximum length of an individual feed is 750 mm. The whole work cycle is completed after the length and number of pieces have been programmed. The B&R control unit is equipped with a large, easy to control display. The programming is performed in simple steps, and thanks to a large graphic display of individual sections it is easy to control for the user. After switching the machine to the manual mode, all unctions of the machine may be controlled separately. All control elements are located on the freely-adjustable control panel.

The saw swivelling range is continuous from 0 ° to 60 ° right at a stable position of the clamped material. Material clamping is performed by full-stroke vices. The machine is equipped with a frequency convertor that allows the saw band’s optimal speed to be set against the processed material within the 20–120 m/min range; this signi cantly increases both the saw band lifetime and the machine’s productivity. The saw band is tilted against the vice load surface at 2 ° angle, which also signi cantly shortens cutting times and contributes to a longer saw band lifetime.

The standard equipment also includes automatic downfeed pressure regulation dependent on the resistance of the processed material, and continuously adjustable arm downfeed. The machine can be extended by a wide range of accessories such as LaserLiner to indicate the cut, additional lighting or even mist lubrication device (microniser). The machine can be adapted to special user requirements also by roller conveyors for the the input and output of the material, length stops or transverse cross feeders.

Key features

  • Hydraulic full-lift clamping main vice and the feeding vice
  • Automatic control of saw band pressure to depth
  • Floating seating of the feeding vice
  • Freely positionable control panel

Cutting parameters

...
540 720x540 540
45°R 500 510x410 350
60°R 350 325x235 310

Technical specification

Working mode: automatic
Machine type: Horizontal bandsaw
Cut: Mitre cut
Mitre cuts range: 0° - 60°
Drive: 4 kW, 3×400 V/50 Hz
Saw band speed: 20 - 120 m/min.
Saw band dimensions: 6 640 x 54 x 1,3 mm
Material loading height: 780 mm
Shortest remainder lengt: 45 mm
Smallest sawing diameter: Ø 5 mm

Machine dimensions

Length: 3 100 mm
Width: 2 900 mm
Height: 2 350 mm
Weight: 2 100 kg

Suitable handling systems

Accessories

For ideal cutting of pipes and profiles, the micro-spray unit applies a grease film on the teeth points and lateral sides of the saw band. Micro-spray-systemFor ideal cutting of pipes and profiles, the micro-spray unit applies a grease film on the teeth points and lateral sides of the saw band.

Device for clamping materials in layers and bundles with the use of an additional vertical clamping unit. Hydraulic bundle clamping device Device for clamping materials in layers and bundles with the use of an additional vertical clamping unit.

A lamp for lighting the workspace, adjustable and mountedon the flexible arm. Digital arm angle indicatorFor an accurate reading angles of the arm position. Reading variables show digital display.

The laser unit copies the exact line in the saw band axis to the material. Laser Liner allows precise adjustment of the marked material. Laser linerThe laser unit copies the exact line in the saw band axis to the material. Laser Liner allows precise adjustment of the marked material.

A lamp for lighting the workspace, adjustable and mountedon the flexible arm. Workspace lightingA LED lamp for lighting the workspace, adjustable and mounted on the flexible arm.

Pistol for machine cleaning Pistol for machine cleaningTool for fast and easy cleaning of the machine from chips and burrs.

Vice pressure regulation Vice pressure regulationThe pressure regulation of both cylinders is centrally preset, firstly to be avoided of the deformations by thin-walled pipes and profiles.