Orbital 250 NS
This machine is used to remove burrs after cutting, mainly in locksmith workshops and manufacturing plants. It is suitable for easy and fast deburring of profiles and solid materials up to 120 mm diameter. Single 250 S is equiped with dual speed motor and with a frequency converter that enables the brush speed to be continuously regulated in order to achieve optimum deburring results, depending on the type of material and brush type.
Material feeding is manually, to the brush through the side opening and height-adjustable table. The processed material is evenly deburred during hand turning. The dust that arises when deburring, falls into the socket in the middle of the base.
Key features
- Completely covering of machine
- Frequency converter
- Adjustable edges of the inlet opening may be simply adjusted to the size of the material
- Simple anchoring of the machine
*Brushes are not part of the machine. The machine needs a total of 3 identical brushes.
Technical specification
| Maximum material diameter: | 120 x 120 mm |
| Brush size: | 250 x 60 mm / 1 pc |
| Drive: | 2,2 kW, 3 x 400 V/50 Hz |
| Number of revolutions: | 600 - 2 700 min-1 |
| Machine type: | Deburing unit |
Machine dimensions
| Length: | 1 100 mm |
| Width: | 670 mm |
| Height: | 1 440 mm |
| Weight: | 410 kg |