Single 250 S
This machine is used to remove burrs after cutting, mainly in locksmith workshops and manufacturing plants. It is suitable for easy and fast deburring of profiles and solid materials up to 90 mm diameter. Single 250 S is equiped with dual speed motor and with a frequency converter that enables the brush speed to be continuously regulated in order to achieve optimum deburring results, depending on the type of material and brush type.
Material feeding is manually, to the brush through the side opening and height-adjustable table. The processed material is evenly deburred during hand turning. The dust that arises when deburring, falls into the socket in the middle of the base. The machine is easy to operate and ready to work immediately.
Key features
- Height-adjustable table
- Dust drawer located in the middle section of the base
- Frequency converter
- Dual speed motor
*Brush is not part of the machine. The machine need 1 brush.
Technical specification
| Maximum material diameter: | 90 x 90 mm |
| Brush size: | 250 x 55 mm |
| Drive: | 2,2 kW, 3 x 400 V/50 Hz |
| Number of revolutions: | 300 – 2 800 min-1 |
| Machine type: | Deburing unit |
Machine dimensions
| Length: | 510 mm |
| Width: | 480 mm |
| Height: | 1 230 mm |
| Weight: | 85 kg |